Sound Endorsed by Several Professional Testers and Creators
"The BQ-Hurakan is one of the most interesting new FDM 3D printers for beginners. It has many features that improve the print quality and user experience. And if that's not enough for you, BIQU offers upgrades for it, like a camera, a direct drive extruder or a bigger screen. One of the best features, however, is the cooperation and integration of Klipper as firmware. "
"With today's strangled supply chains, a machine that includes Klipper-ready technology while remaining affordable to hobbyists is no easy feat. Biqu managed to make this machine cost effective by developing its own controller hardware. This hardware, which can be found within the Biqu Hurakan, has the necessary capabilities to run Klipper while keeping the machine competitively priced."
"BIQU starts accepting orders for Hurakan low cost FDM 3D printersHurakan relies on a 32-bit Manta M4P board built specifically for Klipper. The board with ARM STM32G0B0RE microcontroller with a clock speed of 64 MHz works in conjunction with a CB1 single-board computer with a quad-core ARM Cortex-A53 processor, clocked at 1.5 GHz and 512 MB DDR3 RAM. The quiet TMC2209 drivers help keep noise levels below 50 dB."
Designed with a smooth machine body line, and cool blue & black colorway, the newly launched 3D printer, Hurakan, is like a hypercar, fast, accurate, and safe. The self-developed integrated Manta control board integrates the CB1 computing board to provide an innovative and compact way to run Klipper. Plus, an independently created BIQU MicroProbe makes the leveling easier and printing more precise. A built-in WiFi module could remotely control your printer. And selectable heating areas contribute to the efficient use of energy. Collaborating with the TMC2209 stepper driver makes the printer super silent at less than 50dB. Various RGB lights add more illumination and appeal! The Hurakan design keeps avid DIYers in mind. Plenty of upgrades from the BIGTREETECH accessory ecosystem are available, so you can build your own one-of-a-kind BIQU Hurakan!
Adjustable heat bed
Material break detection
Black frame with blue accent, like a beautiful Italian hyper with charming machine line and aggressive appearance.
The Core to WOW
The self-developed integrated control board provides an innovative way of running Klipper.
Inspired by the marine organism Manta, the Manta Mainboard's appearance design is mysterious but impressive. M4P mainboard is integrated B2B connection dock to CB1 or CM4, well-compatible with Klipper firmware. Plus, it supports 4 selectable HV drivers to improve stepper performance. Various extended interfaces make your creation more reassuring and even interesting, such as BL touch, filament detection, HDMI display, RGB light, etc. Moreover, multiple fan ports give you headroom to cool your components.
- More friendly operation interface and more convenient configuration settings
- Higher printing accuracy with artificial intelligence algorithm compensation
- Quick application of expansion modules such as camera and accelerometer
Include an ADXL 345 accelerometer board, providing additional computing power and built-in algorithms to enable higher printing accuracy.
Built-in WiFi module
Different terminal devices and Hurakan could be connected to the same WIFI. Then these devices could use LAN control to instruct the work of Hurakan, including adjusting the parameters, starting to print, and pausing the work.
Control Multiple Printers
Multiple printers can be controlled simultaneously via the web page under the same WIFI connection. Input the exclusive IP address of the printer on each web page. One web page controls one printer.
Choose the Part to Heat
100W for the Central Part
240W for the Whole Bed
Users can press the switch to adjust different heating power according to the size of the model, which can save about 20% on electricity consumption. The red light is on for 100W. Both the red and blue lights are on for 240W.
Enjoy printing and being environmentally friendly.
Equipped with BIQU MicroProbe, an auto-leveling sensor, which is also compatible with other FDM printers.
Replaceable aluminum probe to provide rigidity against small bumps but give away with big crashes to protect your MicroProbe.
Micro Sized Footprint
Take much less space than other retracting probe sensors(BL Touch, CR Touch, etc.), and fit into more spots and crevices where other sensors can't.
Using authentic the TMC2209, an ultra-silent motor driver, the printing noise can be significantly reduced. Less than 50dB all the time, gives you a relatively silent printing environment, nice for the makers at home.
Keep it Bright
Except for the two indicator lights of Microprobe (flash blue light when working and red light at other times). The printer head has also installed RGB lights, with 16.8 million color combinations, and is designed to illuminate the model. Enjoy the customized freedom!
Detect the filament condition.
Pause when filaments run out or break.
Filament Runout Sensor
Ports & Slots
Hurakan is a DIY-friendly printer, whose most accessories can be upgraded. Such as the H2 Extruder, super lightweight and has excellent heat dissipation. The HDMI Display, well-supports Klipper firmware. And Camera helps you monitor your print process. What's more, the Dual Z Upgrade Kit makes your machine more stable.
H2 Series Extruder
Dual Z Upgrade Kit
Camera (Plug and Play)
HDMI Series Screen
What's in the Box
Tools and Screw Accessories
TF Card + Card Reader
Filament for Test
480 x 470 x 482mm
220 x 220 x 270mm
0.1mm - 0.3mm
PLA / ABS / PETG... (Any<260℃.)
USB Drive / LAN Controlled
Cura / Repetier-Host / Simplify 3D
Heated Bed Power
Maximum Temperature of Heated Bed
Maximum Temperature of Nozzle
Default Speed Limit (Firmware)
Suggested Printing Speed
Filament Runout Detection